Del-Val 200
Blind Nailing Cement
Description
Del-Val 200 Blind Nailing Cement is manufactured by blending select asphalts, mineral fillers and refined solvents. This blend enables the product to set quickly with less slippage of field sheets. Del-Val 200 Blind Nailing Cement is formulated to a heavy-duty brush consistency providing a secure bed in which to lay sheet goods.
Sets quickly with less slippage of field sheets, providing a secure bed in which to lay sheet goods.
Quick Application Guide
ASTM Compliance
Type III
Coverage Rate
2–3 GAL
Per Square
Uses
Del-Val 200 Blind Nailing Cement is used in the application of 90 Lb. roll-roofing paper or SIS Felt as a cold process adhesive. It can also be used, with polyester mat, as an inter-ply cold process adhesive in the creation of a BUR system as well as over aged BUR roofs as a flood coat prior to the introduction of aggregate or other protective coating. DO NOT USE with EPDM, PVC, TPO or other single-ply membranes.
See our selection of underlayments.
Preparation
All surfaces must be clean and free of any oil, grease, dirt and all other foreign matter.
Application
Apply to a clean, dry surface with a brush, roller or squeegee.
Coverage
Apply at a rate of 2 to 3 gallons per 100 sq. ft.
Cleanup Del-Val 200 Blind Nailing Cement
Clean tools with Del-Val Orange Cleaner & Degreaser or mineral spirits, taking necessary precautions when handling combustible liquids.
Code Approvals / Compliance
This product meets or exceeds the requirements of ASTM D-3019 Type III.
Product Information
Sizes Available
Tools Needed
DATA SHEETS
Available From These Distributors
Click a logo to find a location close to you.
Have Additional Questions About Del-Val 200 Blind Nailing Cement?
Have a product specialist reach out to answer any questions you may have.
Please fill out the below form completely and we’ll be happy to get in touch with you!