Del-Val 502 RC 250 Tack Coat is an asphalt based cut-back product used for priming and bonding of asphalt surfaces. Del-Val 502 RC 250 Tack Coat is formulated with refined asphalts and is cut with 100°F flash point mineral spirits to a smooth consistency.
Del-Val 502 RC 250 Tack Coat is used as a prime coat in preparation of asphalt surfaces before overlaying new asphalt surfaces.
Apply with a brush or spray equipment on a dry and clean surface. Surface must be dry and clean before applying.
Approximately 150 sq. ft. per gallon.
DO NOT HEAT MATERIAL. DANGER: COMBUSTIBLE MIXTURE. USE ONLY WITH ADEQUATE VENTILATION. KEEP OUT OF REACH OF CHILDREN. HARMFUL OR FATAL IF SWALLOWED.
|Total Solids||67% to 73% wt|
|Solvent Content||27% to 33% wt|
|Solvent Type||Mineral Spirits|
|Viscosity||250-500 cSt @ 140°F|
|Softening Point||115° – 130°F|
|Penetration||60 – 110|
Meets: ASTM D-2028 and ASSHTO M81 Specifications