Image of Del-Val 110 Fibered Roof Coating in 5 Gallon Pail
Top of the Line Fibered Aluminum

Del-Val 303

Premium Fibered Aluminum

Our Highest Grade, Cool Roof Rated, Highly Reflective Fibered Aluminum Coating!

Description

Del-Val 303 Premium Fibered Aluminum Roof Coating is a high performance coating that protects and extends the life of asphalt and metal roof surfaces. Formulated using selected asphalts and blended with high quality aluminum pigments with refined solvents and reinforcing fibers. Del-Val 303 Premium Fibered Aluminum Roof Coating’s highly reflective surface protects the roof’s surface from destructive overheating and actinic deterioration.

Our high performance reflective coating formulated using selected asphalts and blended with high-quality aluminum pigments with reinforcing fibers protects roofs from overheating and deterioration.

Where to Use Del-Val 303 Premium Fibered Aluminum Roof Coating
BUR
APP
SBS
Metal
Flashings
Single-Ply

Quick Application Guide

Solar Reflectance

0.70

Initial Cool Roof Rating

Thermal Emittance
0.37
Initial Cool Roof Rating

Coverage Rate

1–1½ GAL

Per Square (Per Coat)

Uses

Del-Val 303 is formulated for applications over new or existing built up roofs, APP, SBS, smooth or granulated surfaces, cap sheet and flashings. It can also be used for masonry surfaces and metal surfaces. DO NOT USE with EPDM, PVC, TPO or other single-ply membranes.

Preparation

Prepare the roof surface by sweeping clean any dust, dirt or debris. Use a wire brush to remove rust from metal. Roof surface must be oil-free and free of moisture both on and beneath the surface. Repair all holes, cracks, blisters, tears or breaks by spreading Del-Val 211 Flashing Cement over damaged area, then embed United Asphalt Cotton or Fiberglass Fabric. Allow repairs to cure 60 days before coating.

Application

Apply Del-Val 303 with a soft bristled brush, paint roller or heavy-duty spray equipment. Product should be mechanically mixed before applying. Spread the product uniformly over the roof surface. Work the coating in one direction. Do not work coating excessively during application as overworking the coating can have a damaging effect on the leafing of the aluminum. Do not apply if ambient temperature will drop below 32° F in a 24-hour period or dew will settle before coating is allowed to dry.

Coverage

Apply at the rate of 1 to 1.5 gallons per 100 sq. ft.

Cleanup Del-Val 303 Premium Fibered Aluminum Roof Coating

Clean tools with Del-Val Orange Cleaner & Degreaser or mineral spirits, taking necessary precautions when handling combustible liquids.

Code Approvals / Compliance

This product meets or exceeds the requirements of ASTM D-2824 Type III and is Cool Roof Rated.

Depend on Del-Val Logo

Frequently Asked Questions (FAQ)

What is the coverage rate?
2
5
What is the lowest temperature I can apply Del-Val 303 Premium Fibered Aluminum Coating?
2
5

Looking for our Premium Non-Fibered Aluminum Coating?

Del-Val 304 Premium Non-Fibered Aluminum Roof Coating in 5 Gallon Pail

Del-Val 304

Premium Non-Fibered Aluminum Roof Coating

Product Information

Sizes Available

1 Gallon Capacity Pail
5 Gallon Capacity Pail
55 Gallon Capacity Drum

Tools Needed

Brush Tool Graphic
Roller Tool Graphic
Spray Tool Graphic

DATA SHEETS

How Much Will You Need?*

With an Estimate of How Much You May Need, Buy it Locally…

*This calculator is provided as a guide. Do to variables of each project, we can not guarantee the calculated result is what will actually be needed for your specific project.

Available From These Distributors

Click a logo to find a location close to you.

Have Additional Questions About Del-Val 303 Premium Fibered Aluminum Roof Coating?
Image of Del-Val 110 Fibered Roof Coating in 5 Gallon Pail
Have a product specialist reach out to answer any questions you may have.

Please fill out the below form completely and we’ll be happy to get in touch with you!

New Inquiry for Del-Val 303 Premium Fibered Aluminum Roof Coating

Which Best Describes You?