Our Basic Fibered Aluminum
Del-Val 300
Silver Seal Fibered Aluminum
Description
Del-Val 300 Silver Seal Fibered Aluminum is a protective metallic shield that extends the life of asphalt and metal roof surfaces. Del-Val 300 Silver Seal Fibered Aluminum’s reflective surface protects the roof’s surface from destructive overheating and actinic deterioration.
A fiber-reinforced, protective metallic shield that extends the life of asphalt and metal roof surfaces and more!
Quick Application Guide
ASTM Compliance
D-2824
Type III
Coverage Rate
1–1½ GAL
Per Square (Per Coat)
Preparation
Prepare the roof surface by sweeping clean any dust, dirt or debris. Use a wire brush to remove and rust from metal. Roof surface must be oil free and free of moisture both on and beneath the surface. Repair all holes, cracks, blisters, tears or breaks by spreading Del-Val 211 Flashing Cement over damaged area then embed Cotton or Fiberglass fabric. Allow repairs to cure 60 days before coating.
Application
Apply Del-Val 300 Silver Seal Fibered Aluminum with a soft bristled brush, paint roller or heavy duty spray equipment. Product should be mechanically mixed before applying. Spread the product uniformly over the roof surface. Do not apply if ambient temperature will drop below 32° F in a 24-hour period or dew will settle before coating is allowed to dry.
Coverage
Apply at the rate of 1 to 1.5 gallons per 100 sq. ft.
Cleanup Del-Val 300 Silver Seal Fibered Aluminum Coating
Clean tools with Del-Val Orange Cleaner & Degreaser or mineral spirits, taking necessary precautions when handling combustible liquids.
Code Approvals / Compliance
This product meets or exceeds the requirements of ASTM D-2824 Type III.
Precautions
Del-Val 300 should not be applied if dew is present, roof is at all wet, impending moisture is expected within 24 hours or where ponding water is present. Any of these conditions will have an adverse effect on the performance of the product.
Frequently Asked Questions (FAQ)
What is the coverage rate?
The basic guidance for coverage is about 1 to 1-1/2 gallons per square (per coat). To make it easier to determine how much you will need for your job, we've put together a calculator tool.
What is the lowest temperature I can apply Del-Val 300 Silver Seal Aluminum Coating?
The lowest temperature Del-Val 300 should be applied is 40°F.
Do not apply if ambient temperature will drop below 32°F in a 24-hour period.
Looking for a Non-Fibered Aluminum Coating?
Del-Val 301
Silver Seal Non-Fibered Aluminum
Product Information
Sizes Available
Tools Needed
DATA SHEETS
How Much Will You Need?
With an Estimate of How Much You May Need, Buy it Locally…
*This calculator is provided as a guide. Do to variables of each project, we can not guarantee the calculated result is what will actually be needed for your specific project.
Available From These Distributors
Click a logo to find a location close to you.
Have Additional Questions About Del-Val 300 Silver Seal Fibered Aluminum?
Have a product specialist reach out to answer any questions you may have.
Please fill out the below form completely and we’ll be happy to get in touch with you!