![Del-Val 110 Fibered Roof Coating in 5 Gallon Pail Image of Del-Val 110 Fibered Roof Coating in 5 Gallon Pail](https://unitedasphalt.com/wp-content/uploads/2023/03/Roof-Master-Plus-221-5G-Product-Image.png)
One of Most Popular Products!
Roof-Master
Plus 221
Ultimate Rubberized Flashing Cement
Description
Roof-Master Plus 221 Ultimate Rubberized Flashing Cement is a high grade SBS rubberized flashing cement manufactured using the highest quality chemical ingredients. Roof-Master Plus 221 Ultimate Rubberized Flashing Cement is soft, pliable cement that gradually hardens to a compound that is elastic, durable and resistant to water.
Ideal for sealing emergency leaks on both wet and dry roof surfaces and has excellent underwater adhesion.
Quick Application Guide
Min Mil Thickness
1/8″
Apply with Trowel
Larger Areas
1/4″–2″
Embed with Fabric
Coverage Rate
8 GAL
Per Square (Per Coat)
Uses
Specially formulated for use in damp, wet roofing situations. Roof Master Plus 221 Ultimate Rubberized Flashing Cement can be used as a heavy duty flashing cement for repairing flashings, asphalt shingles, built-up roofs, metal and masonry surfaces. Great for sealing leaks and openings at flashings (chimneys, vents, skylights, metal joints, gutters). DO NOT USE with EPDM, PVC, TPO or other single-ply membranes.
Preparation
Surface must be clean and free of dirt, dust, oil or grease and be free of any other foreign matter that would interfere with good adhesion. In colder climates we recommend storing the product at room temperature for 24 hours prior to application.
Application
Apply with a trowel or putty knife. Spread Roof Master Plus 221 to approximately 1/8” thickness and work thoroughly into the problem area. Repairing cracks and blisters: if the area is 1/4” wide to 2” long apply United Asphalt Cotton or Fiberglass Fabric for reinforcement, then cover with additional cement.
Coverage
Approximately 8 gallons per sq (per coat)
Cleanup Roof-Master Plus 221 Ultimate Rubberized Flashing Cement
Clean tools with Del-Val Orange Cleaner & Degreaser or mineral spirits, taking necessary precautions when handling combustible liquids.
Code Approvals / Compliance
This product meets or exceeds the requirements of ASTM 4586 Type I and ASTM D-3409
V.O.C. Less than 300 g/L
Precaution
DO NOT THIN. DO NOT HEAT CONTAINER. DO NOT store in an area where temperatures exceed 120°F.
Also Check out:
Roof-Master 220
All-Weather Flashing Cement
Product Information
Sizes Available
Tools Needed
DATA SHEETS
Available From These Distributors
Click a logo to find a location close to you.
Have Additional Questions About Roof-Master Plus 221 Ultimate Rubberized Flashing Cement?
![Del-Val 120 Fibered Emulsion Coating in 5 Gallon Bucket Del-Val 120 Fibered Emulsion Coating in 5 Gallon Bucket](https://unitedasphalt.com/wp-content/uploads/2023/03/Roof-Master-Plus-221-5G-Product-Image.png)
Have a product specialist reach out to answer any questions you may have.
Please fill out the below form completely and we’ll be happy to get in touch with you!