Prep for an Acrylic Coating System
Acrylic Primer Sealer
Prevent Asphalt Bleed & Enhance Adhesion of your Armour Proof Acrylic Coating System
AP-1300 Acrylic Primer Sealer is a water-based, acrylic copolymer, primer/sealer and bonding compound developed to assist in the adhesion and preparation of surfaces for application of Armour Proof Coating products. Armour Proof AP-1300 Acrylic Primer Sealer bonds light dust, chalk or mineral surfaced membranes to enhance adhesion of Armour Proof Elastomeric membrane systems. It provides a barrier to asphalt membranes, preventing staining of the Armour Proof Coating products. It seals the porosity of various substrates for better film build and coverage of the subsequent coatings. AP-1300 ensures better bonding properties, creating a bond between the substrate and the coating system.
bonds light dust, chalk or mineral surfaced membranes to enhance adhesion & provides a barrier to asphalt membranes, preventing staining.
Quick Application Guide
When Applied by Airless Spray Equipment
Recommended Tip Size
Average Coverage Rate
Apply by brush, medium nap roller or airless sprayer.
Airless spray: Minimum pump pressure 2000 psi
Tip Size: .011-.017”, recommended #613
Coverage and Drying Time
Apply AP-1300 at a rate of 300-400 square feet per gallon, according to the substrate and condition. Normal drying time is 1-2 hours.
Preparation of Substrate
Surface must be pressure washed clean, free of all loose particles, dirt debris and other contaminants that could inhibit adhesion. Refer to the Armour Proof Coatings Specification for detailed instructions on how to prepare the specific substrate.
Limitations and Precautions
AP-1300 is a water-based primer and is not freeze-thaw stable. Do not apply AP-1300 when ambient air and substrate temperatures fall below 45°F, or if inclement weather is forecasted. Do not apply if ambient temperature will drop below 32°F or dew will settle before coating is allowed to dry. Do not store sealed containers in prolonged sunlight. PROTECT FROM FREEZING DURING SHIPMENT AND STORAGE. Do not store material at temperatures below 45°F. It will freeze and become unusable at temperatures below 32°F.
Use as Part of a System with these products:
Acrylic Base Coat
Acrylic Finish Coat
Acrylic Finish Coat (Colors)
Grow Your Roofing Business
Become an approved applicator of our Armour Proof Coatings systems and gain the perks of being a trusted and approved contractor. Benefits include project referrals, marketing assistance, product trainings & more!
Have Additional Questions About AP-1300 Acrylic Primer Sealer?
Looking for information on Warranted Roof Coating Systems?
Have a product specialist reach out to answer any questions you have.
Please fill out the below form completely and we’ll be happy to get in touch with you!