The Perfect Start to Restoring Positive Sloped Roofs
100% Acrylic Base Coat
Our Base coat for Armour Proof Acrylic Roof Coating Systems.
DescriptionAP-3100 Acrylic Base Coating is a 100% acrylic elastomeric base coating designed for protecting a wide variety of substrates including metal, asphalt, primed wood, concrete, BUR, most single-ply membranes and spray polyurethane foam. Once cured, Armour Proof AP-3100 Acrylic Base Coating provides a waterproof, durable, seamless, flexible weather resistant layer of protection. AP-3100 must be covered with an Armour Proof, protective finish coat such as AP-3200 Acrylic Finish Coat for a white finish or AP-3300 for a finish in one of 7 colors.
a waterproof, durable, seamless, flexible weather resistant layer of protection provides a quality Foundation for your Acrylic Roof Coating System.
Quick Application Guide
Min Pump Pressure
When Applying with Airless Spray Equipment
Average Coverage Rate
Recommended Tip Size
At a Required PSI of
2000 – 3000
Coverage & Drying TimeApply AP-3100 at a minimum rate of 1 to 1.25 gallons per 100 square feet per coat, according to the substrate and condition. Two coats are recommended. Prepare all seams, penetrations and other flashing details with AP-3100 Acrylic Base Coat and our polyester reinforcement. A minimum of 16 mils DFT is recommended to achieve optimal performance of the coating. Normal drying time is 2-4 hours. Armour Proof Coatings recommends applying AP-3100 by airless spray in multiple coats in a crosshatch pattern. This will avoid pinholes and ensure a uniform film build. Backrolling may be necessary. Refer to the Armour Proof Coatings Specification for detailed instructions.
ApplicationApply by brush, medium nap roller or airless sprayer. Airless spray: Minimum pump pressure 3000 psi Tip Size: .027”-.039” (.031” recommended) Hose: Use 3/8” up to 100’, from 100’ to 200’ use ½” or larger
Preparation of SubstrateSurface must be pressure washed clean, free of all loose particles, dirt debris and other contaminants that could inhibit adhesion. An Armour Proof primer may be required for the particular substrate. Refer to the Armour Proof Coatings Specification for detailed instructions on how to prepare the specific substrate.
Limitations and PrecautionsAP-3100 is a water-based elastomeric acrylic coating and is not freeze-thaw stable. Do not apply AP-3100 when ambient air and substrate temperatures fall below 50° F, or if inclement weather is forecasted. Do not apply over wet substrates or in inclement weather. Do not apply if ambient temperature will drop below 32° F in a 24-hour period or dew will settle before coating is allowed to dry. Do not store sealed containers in prolonged sunlight. PROTECT FROM FREEZING DURING SHIPMENT AND STORAGE. Do not store material at temperatures below 45°F as it will freeze and may become unusable at temperatures below 32° F.
Use as Part of a System with these products:
Acrylic Finish Coat
Acrylic Finish Coat (Colors)
Grow Your Roofing Business
Become an approved applicator of our Armour Proof Coatings systems and gain the perks of being a trusted and approved contractor. Benefits include project referrals, marketing assistance, product trainings & more!
Have Additional Questions About AP-3100 Acrylic Base Coat?
Looking for information on Warranted Roof Coating Systems?
Have a product specialist reach out to answer any questions you have.
Please fill out the below form completely and we’ll be happy to get in touch with you!