Silicone in Shades!
Silicone Roof Coating (Colors)
Armour Proof AP-5300 Silicone Roof Coating in Specialty Colors is a one-part silicone elastomeric coating specifically designed for use in roofing applications. Once cured, this liquid applied silicone coating provides a durable, seamless, flexible, waterproof membrane that resists lateral movement, shear and will allow for normal expansion and contraction. Armour Proof AP-5300 Silicone Roof Coating in Specialty Colors provides greater UV protection than similar coatings and offers increased resistance to moisture penetration. AP-5300 provides excellent long term protection through exceptional weatherability properties. AP-5300 was specifically developed as a protective coating for single-ply membranes, granulated modified bitumen, metal and sprayed-in-place polyurethane foam roofing. AP-5300 is also used as a top coat over Armour Proof AP-5100 Moisture Cure Polyurethane in membrane restorations. With excellent adhesion to all substrates and exceptional durability, AP-5300 is proven to provide excellent solar reflectivity, UV protection and long term waterproofing performance.
A Durable Layer of Seamless, Flexible Protection with all of the Benefits of Silicone Plus Specialty Colors to Achieve a Unique Aesthetic.
Quick Application Guide
Min Mil Thickness
Apply by Roller, Brush or Airless Spray Equip.
Average Coverage Rate
Recommended Tip Size
At a Required PSI of
2000 – 3000
Coverage & Drying Time
Apply AP-5300 at a rate of 1.5 gallons per 100 square feet per gallon per coat, according to the substrate and condition. A minimum of 25 mils DFT is recommended. Armour Proof AP-5100 Moisture Cure Polyurethane may be applied as a Primer/Base Coat at a rate of 1.25 gallons per 100 square feet, and then coated with the AP-5300 Silicone. Skin-Over in 30 minutes, Tack Free in 2 hours, Dry to touch in 6 hours
AP-5300 may be applied by medium nap rollers, soft brushes or conventional airless spray equipment. Apply AP-5300 only to clean, dry, sound surfaces free of loose particles or other foreign matter. For best results, ambient temperature should be between 50-80°F. Higher temperatures will shorten the cure time and working time. Lower temperatures will lengthen the skin over, tack free and ultimate cure time. Sudden temperature declines may also result in dew formation on surfaces, which can prevent adhesion development. For best results, relative humidity should be above 20%. Lower humidity will slow the cure time significantly.
Preparation of Substrate
Surface must be pressure washed clean, free of all loose particles, dirt debris and other contaminants that could inhibit adhesion. An Armour Proof primer may be required for the particular substrate. Refer to the Armour Proof Coatings Specification for detailed instructions on how to prepare the specific substrate.
Limitations and Precautions
AVOID CONTAMINATION IN SEALED CONTAINERS. STORE AWAY FROM HEAT, SOURCES OF IGNITION AND INCOMPATIBLES. USE ONLY IN WELL VENTILATED AREAS. Do not inhale vapor or mist. Do not get on skin, in eyes or on clothing.
Use as Part of a System with these products:
Moisture Cure Polyurethane
Silicone Roof Coating
Grow Your Roofing Business
Become an approved applicator of our Armour Proof Coatings systems and gain the perks of being a trusted and approved contractor. Benefits include project referrals, marketing assistance, product trainings & more!
Have Additional Questions About AP-5300 Silicone Roof Coating (Colors)?
Looking for information on Warranted Roof Coating Systems?
Have a product specialist reach out to answer any questions you have.
Please fill out the below form completely and we’ll be happy to get in touch with you!