Silicone Liquid Walk Pad
Silicone formulation provides durability, flexibility & Waterproofing, while Rubber granules add Texture & Slip Resistance
An excellent solution for safety and preservation of your roof surface, AP-6300 Silicone Liquid Walk Pad has been reformulated with all of the benefits that silicone provides! Armour Proof AP-6300 Silicone Liquid Walk Pad is formulated with rubber granules to add texture and slip resistance and is excellent for protecting metal, wood, EPDM, APP, TPO and Hypalon surfaces. AP-6300 Silicone Liquid Walk Pad provides a durable, seamless and flexible waterproof / weather resistant membrane with excellent elongation, tensile strength and UV protection for high traffic areas. AP-6300 is now available in a high visibility Safety Yellow!
A two-Part application adds roof surface protection & a Slip Resistance Walk Surface.
Quick Application Guide
Recommended Wet Mil
Applied in Masked Area, Backroll as needed
Average Cure Time
High Humidity/Low Temps will Increase Cure Time
Application, Coverage & Drying Time
Apply AP-6300 by phenolic core roller at a rate of 1 gallon per 17.5 square feet, according to the substrate and condition. Backrolling may be necessary to prevent pinholes. A minimum of 56 mils DFT will result when applying at the recommended 90 mils wet thickness. Mask off the area and pour the coating, rolling out the product at the recommended spread rate. Too thick of a coating will cause solvent entrapment. Cure time is 24-48 hours.
Preparation of Substrate
Surface must be pressure washed clean, free of all loose particles, dirt debris and other contaminants that could inhibit adhesion. Wire brushing may be recommended in addition to pressure washing the surface. The surface must be completely dry to prevent blistering of the product. Refer to the Armour Proof Coatings Specification for detailed instructions on how to prepare the specific substrate.
Limitations and Precautions
Do not apply when temperature is below 40°F during application or drying time. Apply product when relative humidity is below 90° F. Allow for adequate dry times between coats and inclement weather. Higher humidity or lower temperatures will slow down dry times.
Use as Part of a System with these products:
Silicone Roof Coating
Grow Your Roofing Business
Become an approved applicator of our Armour Proof Coatings systems and gain the perks of being a trusted and approved contractor. Benefits include project referrals, marketing assistance, product trainings & more!
Have Additional Questions About AP-6300 Silicone Walk Pad?
Looking for information on Warranted Roof Coating Systems?
Have a product specialist reach out to answer any questions you have.
Please fill out the below form completely and we’ll be happy to get in touch with you!