Del-Val 120 Fibered Emulsion Coating in 5 Gallon Bucket
Wall Protection Coating

AP-7100

Acrylic Wall Finish Coat

Protect a Wide Variety of Substrates with a Durable, Waterproof Layer of Protection!

Description

AP-7100 Acrylic Wall Finish Coat is a 100% acrylic elastomeric finish coating designed for protecting a wide variety of substrates, including stucco, concrete, brick, EIFS, metal and primed wood. AP-7100 Acrylic Wall Finish Coat bridges hairline cracks, protecting the substrate from wind-driven rain, allowing expansion and contraction with the varying temperatures. It also allows moisture vapor from within the substrate to escape without causing blistering or peeling of the coating. Once cured, AP-7100 provides a waterproof, durable, seamless, flexible, weather resistant layer of protection.

bridges hairline cracks, protecting the substrate from wind-driven rain, allowing expansion and contraction with the varying temperatures.

Where to Use AP-7100 Wall Coat
Concrete
EIFS
Masonry
Metal
Stucco

Available Colors

White
Gray
Black
Beige
Brown
Tile Green
Pantina Green
Tile Red

Quick Application Guide

Min Mil Thickness

18 DFT

Apply by Roller, Brush or Airless Spray Equip.

Average Coverage Rate

1–1¼ GAL

Per Square (Per Coat)
Two Coats Recommended

Recommended Tip Size

.031

At a Required PSI of
3000

Coverage & Drying Time

Apply AP-7100 at a minimum rate of 1 to 1.25 gallons per 100 square feet per coat, according to the substrate and condition. Two coats are recommended. A minimum of 18 mils DFT is recommended to achieve optimal performance of the coating. Normal drying time is 2-6 hours. Armour Proof Coatings recommends applying AP-7100 by airless spray in multiple coats in a crosshatch pattern. This will avoid pinholes and ensure a uniform film build. Backrolling may be necessary. Refer to the Armour Proof Coatings Specification for detailed instructions.

Application

Apply by brush, medium nap roller or airless sprayer.
Airless spray: Minimum pump pressure 3000 psi
Tip Size: .027”-.039” (.031” recommended)
Hose: Use 3/8” up to 100’, from 100’ to 200’ use ½” or larger

Preparation of Substrate

Surface must be pressure washed clean, free of all loose particles, dirt debris and other contaminants that could inhibit adhesion. An Armour Proof primer may be required for the particular substrate. Refer to the Armour Proof Coatings Specification for detailed instructions on how to prepare the specific substrate.

Limitations and Precautions

AP-7100 is a water-based, elastomeric, acrylic coating and is not freeze-thaw stable. Do not apply AP-7100 when ambient air and substrate temperatures fall below 50°F, or if inclement weather is forecasted. Do not apply over wet substrates or in inclement weather. Do not apply if ambient temperature will drop below 32°F in a 24-hour period or dew will settle before coating is allowed to dry. Do not store sealed containers in prolonged sunlight. PROTECT FROM FREEZING DURING SHIPMENT AND STORAGE. Do not store material at temperatures below 45°F. It will freeze and may become unusable at temperatures below 32°F.

Use as Part of a System with these products:

AP-2300 Acrylic Mastic 2024 Rebrand in 3.5 Gallon Pail

AP-2300

Acrylic Mastic

AP-3100 100% Acrylic Base Coat 2024 Rebrand in 5 Gallon Bucket

AP-3100

Acrylic Base Coat

Product Information

Sizes Available

5 Gallon Capacity Bucket
55 Gallon Capacity Drum
275 Gallon Capacity Tote

Tools Needed

Brush Tool Graphic
Roller Tool Graphic
Spray Tool Graphic

DATA SHEETS

Available From These Distributors

Click a logo to find a location close to you.

ABC Supply Co Distributor Logo
Beacon Roofing Supply Distributor Logo
J & L Building Materials Inc. Distributor Logo
New Castle Building Products Distributor Logo
Image of SRS Distribution's Logo
Universal Supply Co Distributor Logo
Image of Armour Proof Coatings Approved Applicator Badge

Grow Your Roofing Business

Become an approved applicator of our Armour Proof Coatings systems and gain the perks of being a trusted and approved contractor. Benefits include project referrals, marketing assistance, product trainings & more!

Have Additional Questions About AP-7100 Acrylic Wall Finish Coat?
Del-Val 120 Fibered Emulsion Coating in 5 Gallon Bucket
Looking for information on Warranted Roof Coating Systems?
Have a product specialist reach out to answer any questions you have.

Please fill out the below form completely and we’ll be happy to get in touch with you!

New Inquiry for AP-7100 Wall Coat

Which Best Describes You?