Uses

Del-Val 100 Quick-Dry Asphalt Primer is designed for use as an all-purpose utility prime coat for concrete, masonry, Gypsum, brick and metal surfaces, where roofing, waterproofing, damp-proofing and other asphalt coatings are applied. DO NOT USE with EPDM, PVC, TPO or other single-ply membranes.

Preparation

Surface must be clean and free of dirt, dust, oil or grease and be free of any other foreign matter that would interfere with good adhesion.

Application

Apply to a clean dry surface using a brush, roller or heavy duty spray equipment. For best results weather should be clear with no threat of rain for 24 hours. Drying time varies with weather conditions.

Coverage

Apply at a rate of approximately 1 gallon per 100 sq. ft. depending upon absorbency and type of surface that is being primed.

Cleanup Del-Val 100 Quick-Dry Asphalt Primer

Clean tools with Del-Val Orange Cleaner & Degreaser or mineral spirits, taking necessary precautions when handling combustible liquids.

Code Approvals / Compliance

This product meets or exceeds the requirements of ASTM D41 and Federal Spec SS-A-701B