Del-Val 110 Fibered Roof Coating

Product Fast Facts
Waterproof Seal for Your Roof
Fiber Reinforced
Liquid Brush Grade


Del-Val 110 Fibered Roof Coating is a fiber reinforced asphalt roof coating that provides a durable watertight barrier over existing roof surfaces.


Del-Val 110 Fibered Roof Coating may be used on smooth surface BUR, or SBS and APP bituminous membranes, metal surfaces, roll-roofing. DO NOT USE with EPDM, PVC, TPO or other single-ply membranes.

Suitable Roof Substrates
BUR SBS APP Metal Roll Roofing EPDM PVC TPO Other Single-Ply Membranes


All surfaces must be clean and free of any oil, grease, dirt and all other foreign matter. Repair all holes, cracks, blisters, tears or breaks by spreading Del-Val 211 Flashing Cement over damaged area then embed United Asphalt Cotton or Fiberglass fabric.


Apply to a clean dry surface using a brush or squeegee. For best results weather should be clear with no threat of rain for 48 hours.


Apply at the rate of approximately 4 gallons per 100 sq. ft. Must stir coating before using.


Clean tools with Del-Val Orange Cleaner & Degreaser or mineral spirits, taking necessary precautions when handling combustible liquids.

Code Approvals/Compliance

This product meets or exceeds the requirements of ASTM D 4479 Type I

Comments are closed.

  • Silicone Roof Patch Is Here!

    Adheres to Wet Surfaces with No Mixing Required!

    Learn More!

    Del-Val 241 2 Gallon Pails Three Pails for Web Spot

    Available Now in Black, White & Gray!

About Us

Ut non nulla mi, eget imperdiet sem. Nam lacus ligula, venenatis vel aliquet eu, venenatis congue magna. Sed rutrum faucibus semper.

  • Contact Us