Del-Val 111
Non-Fibered Roof Coating
Description
Del-Val 111 Non-Fibered Roof Coating is a non-fibered asphalt coating that is used to prevent moisture penetration and protection of a variety of roof surfaces. After Del-Val 111 Non-Fibered Roof Coating is applied it forms a smooth, flexible shell that helps resist the entrance of moisture and has excellent adhesion to most roof surfaces.
With excellent adhesion to most roof surfaces, its smooth, flexible shell helps resist the entrance of moisture.
Quick Application Guide
ASTM Compliance
D449-83
Coverage Rate
1–2 GAL
Per Square (Per Coat)
Uses
Del-Val 111 Non-Fibered Roof Coating is used for exterior below-grade masonry and block walls where no hydrostatic pressure is present. It is used for coating all types of smooth surface asphalt roofs and can also be used to protect wood and metal above or below-grade.
Preparation
All surfaces must be clean and free of any oil, grease, dirt and all other foreign matter that would interfere with good adhesion. Must stir coating before using.
Application
Can be applied using: brush, roller or heavy duty spray equipment. Allow 24 hours drying time before backfilling against the foundation walls. Do not apply over wet/damp or frost covered surfaces.
Coverage
Approximately 1–2 gallons per sq (per coat)
Cleanup Del-Val 111 Non-Fibered Roof Coating
Clean tools with Del-Val Orange Cleaner & Degreaser or mineral spirits, taking necessary precautions when handling combustible liquids.
Code Approvals / Compliance
This product meets or exceeds the requirements of ASTM D449-83 Type I & ASTM D-4479 Type I
Product Information
Sizes Available
Tools Needed
DATA SHEETS
Available From These Distributors
Click a logo to find a location close to you.
Have a product specialist reach out to answer any questions you may have.
Please fill out the below form completely and we’ll be happy to get in touch with you!