Del-Val 120
Fibered Emulsion Coating
Light, Brush-Grade. Renews Roof Surface with an Odorless, Water Cleanup. Fibered for Additional Reinforcement!
Description
Del-Val 120 Fibered Emulsion Coating is a fiber reinforced asphalt based clay emulsion coating designed for both brush and spray applications on a variety of roof substrates. Del-Val 120 Fibered Emulsion Coating has excellent resistance to water and cures to a tough durable finish.
Quick Application Guide
Quick, Easy Cleanup
WATER
With Soap
ASTM Compliance
Type IV
Coverage Rate
3 GAL
Per Square (Per Coat)
Uses
Del-Val 120 Fibered Emulsion Coating may be used on smooth surfaces BUR, APP bituminous membranes, SBS, metal surfaces, and roll-roofing. It can also be used for damp-proofing above- and below-grade foundation walls and masonry surfaces.
Preparation
All surfaces must be clean and free of any oil, grease, dirt and all other foreign matter. Repair all holes, cracks, blisters, tears or breaks by spreading Del-Val 211 Flashing Cement over damaged area then embed United Asphalt Cotton or Fiberglass Fabric.
Application
Apply to a clean surface using a brush or squeegee. For best results weather should be clear with no threat of rain for 48 hours.
Coverage
Apply at the rate of approximately 3 gallons per 100 sq. ft. Must stir coating before using.
Cleanup Del-Val 120 Fibered Emulsion Coating
Clean tools with warm water and soap.
Code Approvals / Compliance
This product meets or exceeds the requirements of ASTM D 1227-87 Type IV
Product Information
Sizes Available
Tools Needed
DATA SHEETS
Available From These Distributors
Click a logo to find a location close to you.
Have Additional Questions About Del-Val 120 Fibered Emulsion Coating?
Have a product specialist reach out to answer any questions you may have.
Please fill out the below form completely and we’ll be happy to get in touch with you!