Del-Val 200 Blind Nailing Cement

Product Fast Facts
Cold Process Adhesive
Heavy-Duty Brush-Grade
Sets Quickly


Del-Val 200 Blind Nailing Cement is manufactured by blending select asphalts, mineral fillers and refined solvents. This blend enables the product to set quickly with less slippage of field sheets. Del-Val 200 Blind Nailing Cement is formulated to a heavy-duty brush consistency providing a secure bed in which to lay sheet goods.


Del-Val 200 Blind Nailing Cement is used in the application of 90 Lb. roll-roofing paper or SIS Felt as a cold process adhesive. It can also be used, with polyester mat, as an inter-ply cold process adhesive in the creation of a BUR system as well as over aged BUR roofs as a flood coat prior to the introduction of aggregate or other protective coating. DO NOT USE with EPDM, PVC, TPO or other single-ply membranes. See our selection of underlayments.

Suitable Roof Substrates
Cold Process Adhesive BUR Systems EPDM PVC TPO Single-Ply Membranes


All surfaces must be clean and free of any oil, grease, dirt and all other foreign matter.


Apply to a clean, dry surface with a brush, roller or squeegee.


Apply at a rate of 2 to 3 gallons per 100 sq. ft.

Cleanup Del-Val 200 Blind Nailing Cement

Clean tools with Del-Val Orange Cleaner & Degreaser or mineral spirits, taking necessary precautions when handling combustible liquids.

Code Approvals/Compliance

This product meets or exceeds the requirements of ASTM D-3019 Type III.

Comments are closed.

  • Silicone Roof Patch Is Here!

    Adheres to Wet Surfaces with No Mixing Required!

    Learn More!

    Del-Val 241 2 Gallon Pails Three Pails for Web Spot

    Available Now in Black, White & Gray!

About Us

Ut non nulla mi, eget imperdiet sem. Nam lacus ligula, venenatis vel aliquet eu, venenatis congue magna. Sed rutrum faucibus semper.

  • Contact Us