Del-Val 303
Premium Fibered Aluminum
Description
Del-Val 303 Premium Fibered Aluminum Roof Coating is a high performance coating that protects and extends the life of asphalt and metal roof surfaces. Formulated using selected asphalts and blended with high quality aluminum pigments with refined solvents and reinforcing fibers. Del-Val 303 Premium Fibered Aluminum Roof Coating’s highly reflective surface protects the roof’s surface from destructive overheating and actinic deterioration.
Our high performance reflective coating formulated using selected asphalts and blended with high-quality aluminum pigments with reinforcing fibers protects roofs from overheating and deterioration.
Quick Application Guide
0.70
Initial Cool Roof Rating
Coverage Rate
1–1½ GAL
Per Square (Per Coat)
Uses
Del-Val 303 is formulated for applications over new or existing built up roofs, APP, SBS, smooth or granulated surfaces, cap sheet and flashings. It can also be used for masonry surfaces and metal surfaces. DO NOT USE with EPDM, PVC, TPO or other single-ply membranes.
Preparation
Prepare the roof surface by sweeping clean any dust, dirt or debris. Use a wire brush to remove rust from metal. Roof surface must be oil-free and free of moisture both on and beneath the surface. Repair all holes, cracks, blisters, tears or breaks by spreading Del-Val 211 Flashing Cement over damaged area, then embed United Asphalt Cotton or Fiberglass Fabric. Allow repairs to cure 60 days before coating.
Application
Apply Del-Val 303 with a soft bristled brush, paint roller or heavy-duty spray equipment. Product should be mechanically mixed before applying. Spread the product uniformly over the roof surface. Work the coating in one direction. Do not work coating excessively during application as overworking the coating can have a damaging effect on the leafing of the aluminum. Do not apply if ambient temperature will drop below 32° F in a 24-hour period or dew will settle before coating is allowed to dry.
Coverage
Apply at the rate of 1 to 1.5 gallons per 100 sq. ft.
Cleanup Del-Val 303 Premium Fibered Aluminum Roof Coating
Clean tools with Del-Val Orange Cleaner & Degreaser or mineral spirits, taking necessary precautions when handling combustible liquids.
Code Approvals / Compliance
This product meets or exceeds the requirements of ASTM D-2824 Type III and is Cool Roof Rated.
Frequently Asked Questions (FAQ)
What is the coverage rate?
The basic guidance for coverage is about 1 to 1-1/2 gallon per square (per coat). To make it easier to determine how much you will need for your job, we've put together a calculator tool.
What is the lowest temperature I can apply Del-Val 303 Premium Fibered Aluminum Coating?
The lowest temperature Del-Val 303 should be applied is 40°F.
Do not apply if ambient temperature will drop below 32°F in a 24-hour period.
Looking for our Premium Non-Fibered Aluminum Coating?
Del-Val 304
Premium Non-Fibered Aluminum Roof Coating
Product Information
Sizes Available
Tools Needed
DATA SHEETS
How Much Will You Need?*
With an Estimate of How Much You May Need, Buy it Locally…
*This calculator is provided as a guide. Do to variables of each project, we can not guarantee the calculated result is what will actually be needed for your specific project.
Available From These Distributors
Click a logo to find a location close to you.
Have Additional Questions About Del-Val 303 Premium Fibered Aluminum Roof Coating?
Have a product specialist reach out to answer any questions you may have.
Please fill out the below form completely and we’ll be happy to get in touch with you!