Image of Del-Val 110 Fibered Roof Coating in 5 Gallon Pail

Water-Based Below Grade

Del-Val 411

Fibered Foundation Emulsion

Fiber Reinforced Moisture Prevention for Foundation Walls w/ Less Odor & Easier Clean-up than Solvent-Based & Meets ASTM.

Description

Del-Val 411 Fibered Foundation Emulsion is an asphalt-based, clay emulsion with fibers specifically formulated to offer a tight film that combines both excellent strength and resistance to water. Del-Val 411 Fibered Foundation Emulsion is manufactured from refined asphalts, reinforcing non-asbestos fibers and clays. Del-Val 411 has a brown appearance when wet but will dry to a near black color. Asphalt emulsions are very low odor alternatives to solvent-based coatings. Del-Val 411 applied directly from the container is corrosion-resistant and waterproof when dry. Del-Val 411 is reinforced with short fibers for application by brush, roller or spray.

Reinforced with short fibers to offer strength while reducing dampness & moisture infiltration through foundation walls, parapets, firewalls and more.

Where to Use Del-Val 411 Fibered Foundation Emulsion
Masonry
Gypsum
Brick

Quick Application Guide

ASTM Compliance

D1187

Type I
ASTM Compliance
D1227
Type II, Class I

Coverage Rate

40-50 FT2

Per Gallon (Per Coat)

Uses

Del-Val 411 Fibered Foundation Emulsion is ideal for reducing dampness and moisture infiltration through foundation walls, parapets, firewalls, tanks, culverts, cisterns and bridge abutments. Del-Val 411 is applicable for above-grade cavity wall applications and below-grade masonry wall damp proofing and helps to minimize internal structural damage from mildew and mold. Suitable for “green” or slightly damp surfaces.

Preparation

All surfaces must be clean and free of any oil, grease, dirt and all other foreign matter. Must stir coating before using.

Application

Can be applied using: brush, roller or heavy duty spray equipment. Allow 24 hours drying time before backfilling against the foundation walls. Do not apply over wet / damp or frost covered surfaces. For best results weather should be clear with no threat of rain for 48 hours.

Coverage

Approximately 40 – 50 ft.²/gal. (0.1 – 1.2 m²/L) (30 wet mils) per coat. Coverage will vary depending upon age, dryness and porosity of surface.

Cleanup Del-Val 411 Fibered Foundation Emulsion

Clean tools with Del-Val Orange Cleaner & Degreaser or mineral spirits, taking necessary precautions when handling combustible liquids.

Code Approvals / Compliance

This product meets or exceeds the requirements of ASTM D1187, Type I & ASTM D1227, Type II, Class I.

Product Information

Sizes Available

5 Gallon Capacity Bucket
55 Gallon Capacity Drum

Tools Needed

Brush Tool Graphic
Roller Tool Graphic
Spray Tool Graphic

DATA SHEETS

Available From These Distributors

Click a logo to find a location close to you.

Have Additional Questions About Del-Val 411 Fibered Foundation Emulsion?
Image of Del-Val 110 Fibered Roof Coating in 5 Gallon Pail
Have a product specialist reach out to answer any questions you may have.

Please fill out the below form completely and we’ll be happy to get in touch with you!

New Inquiry for Del-Val 411 Fibered Foundation Emulsion