Del-Val 502
RC-Tack Coat 250 Rapid Cure Tack
Description
Del-Val 502 RC 250 Tack Coat is an asphalt based cut-back product used for priming and bonding of asphalt surfaces. Del-Val 502 RC 250 Tack Coat is formulated with refined asphalts and is cut with 100°F flash point mineral spirits to a smooth consistency.
Used for Priming and Bonding Asphalt Surfaces.
| Physical Properties | |||||||||
| Color | Dark Brown-Black | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Solvent Type | Mineral Spirits | ||||||||
| Flash Point | 105°F | ||||||||
| Viscosity | 250-500 cSt @ 140°F | ||||||||
| Wt/Gal | 8 lbs | ||||||||
| Base Asphalt | |||||||||
| Softening Point | 115° – 130°F | ||||||||
| Penetration | 60 – 110 | ||||||||
Uses
Del-Val 502 RC 250 Tack Coat is used as a prime coat in preparation of asphalt surfaces before overlaying new asphalt surfaces.
Application
Apply with a brush or spray equipment on a dry and clean surface. Surface must be dry and clean before applying.
Coverage
Approximately 150 sq. ft. per gallon.
Cleanup Del-Val 502 RC 250 Tack Coat
Clean tools with Del-Val Orange Cleaner & Degreaser or mineral spirits, taking necessary precautions when handling combustible liquids.
Precaution
DO NOT HEAT MATERIAL. DANGER: COMBUSTIBLE MIXTURE. USE ONLY WITH ADEQUATE VENTILATION. KEEP OUT OF REACH OF CHILDREN. HARMFUL OR FATAL IF SWALLOWED.
Code Approvals / Compliance
Meets: ASTM D-2028 and ASSHTO M81 Specifications
Product Information
Sizes Available
DATA SHEETS
Have Additional Questions About Del-Val 502 RC 250 Tack Coat?
Have a product specialist reach out to answer any questions you may have.
Please fill out the below form completely and we’ll be happy to get in touch with you!