Silane / Siloxane Waterproofer
Del-Val 600 Silane / Siloxane Waterproofer is a high performance concrete and masonry sealer. A solvent-free emulsion based siloxanes for the hydrophobizing impregnation of absorbent, mineral substrates with excellent beading properties. Del-Val 600 is an excellent water repellent for many absorbent mineral substrates, such as bricks, sand-lime brick, natural sandstone and mineral plasters. Del-Val 600 may also serve as a water-repellent primer for emulsion paints and plasters, silicone resin emulsion paints and silicone resin plasters.
An excellent water repellent for many absorbent mineral substrates, such as bricks, sand-lime brick, natural sandstone and mineral plasters.
Quick Application Guide
Per Square (Per Coat)
Clean surface to be coated. Sweep off all loose dirt, dust and debris. Scrub grease and oil spots with an all-purpose detergent.
Mechanically mix before using. Apply with a brush, roller or an airless sprayer. Do not thin.
125 – 150ft² per gallon, or until the substrate is fully saturated.
Cleanup Del-Val 600 Silane / Siloxane Waterproofer
Soap and water can be used to clean tools before this product dries. Dried material may be cleaned up with Del-Val Orange Cleaner & Degreaser or mineral spirits, taking necessary precautions when handling combustible liquids.
Have Additional Questions About Del-Val 600 Silane / Siloxane Waterproofer?
Have a product specialist reach out to answer any questions you may have.
Please fill out the below form completely and we’ll be happy to get in touch with you!