Single-Ply Roof Cleaner
AP-1200
Single-Ply Rinseable Primer / Cleaner
Prep your TPO, EPDM, PVC or Other Single-Ply Roof to Have the Best Surface to Coat!
Description
AP-1200 Single-Ply Rinseable Primer / Cleaner is a low viscosity, water-based rinseable cleaner. AP-1200 Single-Ply Rinseable Primer / Cleaner is designed to chemically alter the surface of new and weathered single-ply membranes by breaking down the chemical bond of the inorganics on the surface and to increase the adhesion of AP-3100, AP-3200 and AP-3300 roof coatings to the substrate.
designed to chemically alter the surface of new and weathered single-ply membranes by breaking down the chemical bond of the inorganics on the surface.
Color
Quick Application Guide
Required Pressure
2,000psi
When Applied by Airless Spray Equipment
Recommended Tip Size
.011–.015
Average Coverage Rate
¼–½ GAL
Application
Apply AP-1200 Single-Ply Rinseable Primer / Cleaner with a 2-3 gallon pressure sprayer at a rate of 300-400 square feet per gallon. Allow the material to stand for 15-20 minutes to wet out and react with the single-ply surface. High-pressure rinse the surface with a minimum of 2,000 psi washer, keeping the tip within 12” of the surface.
Use a squeegee to push the excess water towards the drains. After the roof is cleaned, the surface will be jet black in appearance. If it appears dull and weathered, the process must be repeated. Surface must be dry before the coating application. Single-ply substrate must be coated within 5 days of this application.
Preparation of Substrate
Remove all visible dirt and debris by broom or air blower prior to application. Refer to the Armour Proof Coatings Specification for detailed instructions on how to prepare the specific substrate.
Limitations and Precautions
Do not apply AP-1200 when ambient air and substrate temperatures fall below 50°F, or if inclement weather is forecasted. Do not apply if ambient temperature will drop below 32°F or dew will settle before coating is allowed to dry. Do not store sealed containers in prolonged sunlight. Wear rubber gloves and eye protection when working with AP-1200. PROTECT FROM FREEZING DURING SHIPMENT AND STORAGE. Do not store material at temperatures below 45°F. It will freeze and become unusable at temperatures below 32°F.
Application Information
Use as Part of a System with these products:
AP-3100
Acrylic Base Coat
AP-3200
Acrylic Finish Coat
AP-3300
Acrylic Finish Coat (Colors)
Product Information
Sizes Available
Tools Needed
DATA SHEETS
Available From These Distributors
Click a logo to find a location close to you.
Grow Your Roofing Business
Become an approved applicator of our Armour Proof Coatings systems and gain the perks of being a trusted and approved contractor. Benefits include project referrals, marketing assistance, product trainings & more!
Have Additional Questions About AP-1100 Rust Inhibiting Primer?
Looking for information on Warranted Roof Coating Systems?
Have a product specialist reach out to answer any questions you have.
Please fill out the below form completely and we’ll be happy to get in touch with you!